pushachairs prams strollers buggies joggers
Skip to product information
1 of 4

Graco Relay

Anti-Puncture Tape - Ready to Fit - for Graco Relay front wheels

Anti-Puncture Tape - Ready to Fit - for Graco Relay front wheels

Regular price £5.99 GBP
Regular price Sale price £5.99 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.

The Weldtite (Dr. Sludge) Anti-Puncture Tape is almost guaranteed to STOP FLATS. Also known as a Tyre Liner it sits between the tyre and the inner tube and is great at preventing punctures from thorns, glass and other sharp objects. You will receive 1 length of tape which is ready to fit. It has been cut to the required length and has had the corners rounded off so there are no sharp edges. You will also receive fitting instructions.

  • Enough for 1 tyre
  • 35mm wide tape
  • Strong flexible EVA construction
  • Co-extruded for additional protection
  • Non-brittle and long lasting
  • Wide temperature application
  • Easy to fit
This tape is suitable for tyre sizes:
  • 12½ x 1.75 x 2¼ (47-203)
  • 12½ x 1.75
  • 12 x 1.75
  • 12 x 1.8
  • 12 x 1.85
  • 12 x 1.90
This tape is suitable for Graco Relay front wheels and other Joggers and Running Buggies with 12 inch tyres including:
  • Baby Jogger Summit (front wheels)
  • Baby Trend Expedition (front wheels)
  • Hauck Runner (front wheels)
  • Hauck Infinity
  • Mountain Buggy Terrain (front wheels)
  • Bumbleride Speed (front wheels)
  • Thule Urban Glide (front wheels)
  • Bob Revolution (front wheels)
  • Joovy Zoom (front wheels)
  • Graco Relay (front wheels)
Anti-Puncture Tape Fitting Instructions

Anti-Puncture Tape Fitting Instructions

These fitting instructions are for anti-puncture tape which has not been cut to size. If you have purchased tyre and inner tube sets which include anti-puncture tape, the tape will already have been cut to length, the corners rounded, and the tape placed inside the tyres, so you can ignore steps 1 to 6.
If you have purchased “Ready-to-Fit” anti-puncture tape, the tape will already have been cut to length and the corners rounded, so you can ignore steps 1 to 3.

Fitting Anti-Puncture Tape:

  1. Tuck the tape inside the tyre
  2. Overlap the ends by approx 10-20mm and cut to length (with scissors)
  3. Snip the corners of the tape so there are no sharp edges
  4. Ensure the tape is sitting central in the tyre
  5. Put a couple of pumps of air in the inner tube (just enough to shape it)
  6. Put the inner tube inside the tyre so it holds the tape in place
  7. Fit one side of the tyre onto the wheel, at the same time insert the valve through the valve hole
  8. Push the second side of the tyre over the wheel rim using your thumbs
  9. Ensure the tyre in sitting evenly on the wheel rim and inflate to full pressure
 
IMPORTANT When fitting anti-puncture tape:
  • REMOVE SHARP CORNERS BEFORE FITTING
  • LEAVE 10-20MM OVERLAP

tape instructions

 


 

Tape End
View full details

Collapsible content

Tools Required

Tyre Levers

Tyre Levers are needed to remove your existing tyres. The levers we sell are made of hard wearing nylon which will not damage your wheels.



Pump

A Pump is needed to inflate your tyres during fitting and to keep them inflated for improved performance and longer life.

A selection of Tyre Levers and Pumps can be found below this listing or in the "Maintenance" section which can be accessed from the main menu.

Delivery

All available delivery options will be shown during checkout. Not all delivery options are available all the time. The most popular options are shown below and apply to orders placed before 2pm

Standard Delivery
  • FREE on orders over £30
  • £1.95 on orders under £30
  • UK only
  • Royal Mail 2nd Class
  • Order before 2pm for delivery in 2-5 business days
  • Monday to Friday
Express Delivery
  • £2.95 on all orders
  • UK only
  • Royal Mail 1st Class
  • Order before 2pm for delivery in 1-2 business days
  • Monday to Friday

Our cut-off times for orders are: Monday - Friday 2pm

Royal Mail strike action - Orders placed in the run up, during and after strike days are likely to be subject to delay. We’re sorry for any inconvenience this will cause.
Royal Mail strike action - Orders placed in the run up, during and after strike days are likely to be subject to delay. We’re sorry for any inconvenience this will cause.

Royal Mail Service Updates

Returns


Unwanted items

On Yer Bike (pramtyres.com) is happy to accept back any unwanted items for refund, within 30 days of purchase, providing the following terms are met:

  1. All packaging must be intact so that the item is in a re-saleable condition
  2. You include a copy of your receipt or your name, address and order number.
  3. Return postage costs are covered by the customer (please also note that your original postage charge will not be included in the refund)
  • returns should reach us within 30 days of the order
  • ownership and risk remains with customers until we receive the goods back at our warehouse
  • please state your reason for returning the item/items

If your item/items are faulty please contact us and await instructions from a member of our staff. DO NOT RETURN FAULTY ITEMS UNLESS INSTRUCTED!!

The address for all returns is:

  Pram Tyres
  74 Gunthorpe Road
  Peterborough
  PE4 7TP

If you need to contact us regarding faulty items please use one of the following methods:

  • Email: sales@pramtyres.com

PLEASE DO NOT RETURN ANY FAULTY ITEMS UNLESS INSTRUCTED TO BY A MEMBER OF OUR STAFF.



Royal Mail Service Updates

Tyre and Tube Fitting Instructions

Guide to Fitting Tyres and Inner Tubes

If you are just fitting a new inner tube:
  1. Remove your wheel from the pram, (not always necessary but makes life easier).
  2. Deflate the inner tube, once the air is out, pinch the tyre walls together to make it easier to lever off.
  3. Use a tyre lever, or two levers if your tyre is tight, and lever one side of the tyre off the rim.
  4. Remove the inner tube, and then you can take the tyre off completely.
  5. Check the wheel for any sharp objects / rough surfaces that could cause a puncture
  6. Check the tyre (if not replacing) for any sharp objects, do this by running your fingers around the inside carefully and remove foreign objects.
  7. Once happy, put one side of the tyre back on the rim
  8. Inflate your new inner tube just enough to shape it (a couple of pumps), this will make it much easier to fit - Don't try to fit a fully deflated "floppy" inner tube as you will probably nip it when fitting.
  9. Insert the inner tube into the tyre with the valve in line with the valve hole in the rim
  10. Push the valve into the valve hole
  11. Now you can put the other side of the tyre on the rim, if possible do this with your thumbs as levering a tyre on can sometimes pinch the inner tube. If you do need to use tyre levers be careful not to damage the new tube.
  12. Once the tyre is on you can inflate to the recommended PSI, you can use some Schwalbe Easy Fit to help the tyre slip into place under the rim bead. Its not always necessary but makes it easier. You can also use fairy liquid! but you'll need to clean that off after.
  13. Finally, check to make sure the tyre bead is seated properly on the rim.
  14. Now just put your wheel back on and you're good to go.

If you are replacing the tyre and the inner tube

  1. Remove your wheel from the pram, (not always necessary but makes life easier).
  2. Deflate the inner tube, once the air is out, pinch the tyre walls together to make it easier to lever off.
  3. Use a tyre lever, or two levers if your tyre is tight, and lever one side of the tyre off the rim.
  4. Remove the inner tube, and then you can take the tyre off completely.
  5. Check the wheel for any sharp objects / rough surfaces that could cause a puncture
  6. Once happy, put one side of the new tyre on the rim
  7. Inflate your new inner tube only just enough so it has a "bit of shape", this will make it much easier to fit - Don't try to fit a fully deflated "floppy" inner tube as you will probably nip it when fitting.
  8. Put the semi inflated inner tube in the valve hole of the wheel, and push the tube up into the tyre.
  9. Now you can put the other side of the tyre on the rim, if possible do this with your thumbs as levering a tyre on can sometimes puncture the inner tube. If you do need to use tyre levers be careful not to damage the new tube.
  10. Once the tyre is on you can inflate to the recommended PSI, you can use some Schwalbe Easy Fit to help the tyre slip into place under the rim bead. Its not always necessary but makes it easier. You can also use fairy liquid! but you'll need to clean that off after.
  11. Finally, check to make sure the tyre bead is seated properly on the rim.
  12. Now just put your wheel back on and you're good to go.

TIGHT & UNEVEN FITTING TYRES:

  • Another useful tip for fitting tight tyres, or tyres that you are having trouble sitting evenly on the rim, is to warm them up first, on a radiator or in a warm airing cupboard. This makes them more pliable and a bit easier to fit.

MIS-SHAPED TYRES:

Check out this video before fitting. Click Here for video.

It is a good idea to warm up the tyre and manipulate it to get it as near to normal shape as possible. Mis-shaped tyres are fitted the same way as any other tyre, but special attention should be paid to the part of the tyre which is misshapen. Once the tyre is on the wheel you should inflate it a little at a time and make sure the misshapen part is not coming off the rim, if it is simply push it back into position and add a little more air.
ALWAYS KEEP MIS-SHAPED TYRES INFLATED TO THE MAXIMUM P.S.I.

USEFUL VIDEOS:

Recommended Products

Welcome to PramTyres
pramtyres.com is one of the UK's leading suppliers of tyres, inner tubes and puncture preventing products for pushchairs, prams, strollers, running buggies and jogger style prams.  Our products are suitable for most makes and models including Baby Jogger, Baby Trend, Bob, Bumbleride, Graco, Hauck, Joovy, Mountain Buggy, Out n About, Thule, Phil & Teds, Bugaboo, Venicci, Quinny....  Our parent company, On Yer Bike, was a specialist cycle shop which operated from it's Peterborough premises for more than 40 years.  In 2017 On Yer Bike decided to close it's highstreet cycle shop and move into new premises to concentrate on it's online business which itself has been operating for over 15 years.  No minimum order and fast, low cost delivery in the UK.